Barndominium Floor Plans, House Plans & Designs

A barndominium floor plan is not a house plan with a metal roof drawn on it.

The thing that makes these buildings work — a clear-span structure with no interior load-bearing walls — changes what’s possible inside, and it changes what a good layout looks like. You can put a wall almost anywhere. You can move it later. You can leave a third of the building unfinished and come back to it in five years.

That freedom is the whole appeal, and it’s also why people get stuck. With 1,200 plans in front of you and no structural constraints to narrow the field, where do you start?

This guide covers what actually matters in a barndominium layout, the mistakes we see most often, and how to work out whether you need a stock plan, a modified plan, or a custom design.

Barndominium Plans And Prices

Stock barndominium plan sets start at $849.99 and run to $1,750 for the largest and most detailed designs. That buys a complete set of construction drawings for a design that already exists — the fastest and cheapest route to a permit-ready plan.

What You Are Buying	Price	What You Get
Stock plan set	$849.99 – $1,750	Complete construction drawings for one of 1,200+ existing designs. Download, take to your builder.
Stock plan plus modifications	From $400 on top of the plan price	Moving walls, resizing rooms, flipping the garage, adjusting the footprint. Cheaper than custom because the structure is already engineered.
Fully custom design	$2 per square foot	Drawn from scratch to your lot, your brief and your budget. On a 2,400 sq ft home that is about $4,800.

Three things move a stock plan’s price: total square footage, how many sheets the set runs to, and whether the design includes a shop or garage bay that needs its own structural detailing. Single-story plans under 2,000 sq ft sit at the bottom of the range; multi-story plans with an attached shop sit at the top.

What a plan set does not include is the cost of building the thing. The plan is a fraction of a percent of your total outlay — budget for it accordingly, and do not let a $200 difference between two plan sets decide a $250,000 project.

Shop all 1,200+ stock plans and prices →

Shop Best-Selling Barndominium Floor plans

Customer Reviews

What makes Designing A barndominium plan different

Four things, and understanding them will change how you read every plan you look at.

Clear span means no interior structural walls

In a conventionally framed house, interior walls hold the building up. Move one and you’re into headers, posts and an engineer.

A barndominium’s roof load is carried by the trusses and the exterior frame. Interior walls are partitions, not structure. Practically:

• You can position rooms wherever the plumbing and your life allow
• You can reconfigure the layout years later with framing rather than engineering
• Great rooms can be genuinely open, without a column in the middle
• A 40-foot-wide building gives you 40 feet of uninterrupted space to work with

This is why barndominiums suit people who don’t yet know exactly what they need. Build the shell, finish what you’re sure about, leave the rest.

The wet wall drives your budget more than anything else

Plumbing is the expensive thing to move and the expensive thing to spread out. Group your kitchen, bathrooms and laundry along a single wall or in one compact core and you cut plumbing cost substantially — fewer runs, less concrete to cut if you ever change something, simpler venting.

When you’re comparing two plans you like equally, look at where the wet rooms sit. The one that clusters them will be cheaper to build, and neither plan will tell you that.

Shop space costs a fraction of living space

This is the single biggest financial lever in a barndominium, and it’s specific to this kind of building.

Unfinished shop or garage space doesn’t need insulation to living standards, HVAC, drywall, flooring or interior finish. It’s a slab under a roof with lights and outlets. It costs roughly a third of what finished living space costs per square foot.

So a 40×60 with 1,400 square feet of living space and 1,000 of shop is dramatically cheaper than the same building finished throughout — same footprint, same roof, same foundation. It’s also why “cost per square foot” is such a slippery number here. Always check whether a figure refers to total area under roof or to finished living area.

If you’re not sure how much you need, build the footprint and finish it later. Adding a wall inside an existing shell is cheap. Extending the shell is not.

Ceiling height is a real trade-off, not a free upgrade

Soaring ceilings are half of why people want a barndominium, and they’re worth having. But taller volume means more air to heat and cool, larger HVAC equipment, more expensive insulation, and acoustics that can get lively in an open plan.

Many of the best layouts vary it — height over the great room, standard ceilings over bedrooms and the wet core. That gives you the drama where you see it and the efficiency where you don’t. Look for plans that show ceiling heights rather than assuming a flat number throughout.

Six layout mistakes worth avoiding

Patterns we see repeatedly, in rough order of how much they cost to fix.

Buying square footage instead of buying a layout. A well-organised 1,800 square feet lives better than a badly organised 2,400. Circulation, sightlines and where the doors fall matter more than the total.

Putting the shop door and the front door on the same elevation. It works on the drawing and it’s unpleasant to live with. Separate the working side of the building from the arriving side.

Under-sizing the mudroom and entry. In a rural building with a shop attached, this is the room that absorbs boots, coats, tools and dogs. It’s almost always too small on the plan.

Ignoring orientation. A plan is drawn without a compass on it. Run the long axis roughly east–west and you keep the low afternoon sun off your biggest glass — a meaningful difference to summer cooling. Put the covered porch where it will actually be shaded.

Forgetting the stairs are structural in feel, if not in fact. In a two-storey barndominium the stair placement determines the whole ground-floor circulation. Look at it before you fall for the kitchen.

Not planning for the second phase. Most people finish a barndominium in stages. Plans that anticipate that — an obvious place for a future bedroom, a bathroom roughed in and capped, conduit run — save a lot of money later.

Shop By Barndominium Collections

Stock, modified, or custom — which do you need?

Most people assume they need a custom design and most people don’t. Here’s the honest comparison.

	Cost	Timeline	Best for
Stock plan	$800–$2,500	Immediate	Your needs are conventional and one of the 1,200 plans is close enough
Modified stock plan	Plan + from $400	Days	A plan is nearly right — move a wall, resize a room, flip the garage
Custom design	From $2 per sq ft	10–15 days	An unusual site, an unusual footprint, or requirements no stock plan covers

Start with stock and modify. It’s the route most people should take and the one they most often skip. A basic modification starts at $400 against a custom design at a dollar a square foot — on a 2,400 square foot home that’s $400 versus $2,400, for a result that may be equally good.

Go custom when the site demands it. A steep or awkward lot, a specific view to capture, an unusual shop requirement, or a multigenerational arrangement that doesn’t match anything off-the-shelf. Those are the cases where starting from scratch pays.

On code compliance: all our plans are designed to the International Residential Code, the most widely adopted building code in the United States. That matters because your local building department will review them, and a plan set that already conforms is a much shorter conversation. Note that some states add amendments on top of the IRC — see our state guides for local requirements.

We offer over 1,200+ stock plans. 

Here are more customer reviews:

Custom Barndominium Plans

If you want to design your own unique custom plan, pricing starts at $2/per sq ft.

How does the custom design process work?

We make the process as simple as possible! Enter your square footage on our estimate tool, upload any sketches or drafts and complete the payment. After we receive your order, you’ll get your receipt and an email from one of our pro designers. They will ask for some additional details like foundation type, construction type, roof material, and more—and from there, we’ll get started on your custom design.

Can you make revisions and edits?

You will be able to make revisions to our initial blueprints. Your purchase price includes 2 rounds of “clarifying changes” to make sure your custom design is exactly what you want.

Once you have communicated your needs and approved your draft, you will receive a fully personalized barndominium layout.

How long does it take for custom designs?

The entire process is usually finished with 10 to 15 days. Turnaround time will vary based on project complexity but you can expect your initial blueprint within 7 to 10 days. Revisions and the final design will be delivered within 3 to 5 days after you approve the initial draft.

Are the plans designed to International Residential Code?

Yes, all plans are designed to IRC. International residential code is the most widely adopted building code in the U.S. We make sure all designs comply with the most current version for maximum safety and approval ease.

What a barndominium plan set includes

Worth knowing before you buy, because it’s what your builder and your lender will ask for:

Plans are delivered as PDFs, sized to print to scale. That’s what you hand to a contractor for pricing, to a bank for a construction loan, and to your building department for a permit.

How much will it cost to build?

Finished barndominiums run roughly $65 to $160 per square foot, which is too wide a range to plan against. The number you actually want is the one that matches your finish level.

Finish Level	Cost Per Square Foot	What It Means
Shell only, erected	$30 – $50	Frame, roof, exterior sheeting, slab. No interior at all. You finish it yourself or hire trades directly.
Standard contracted finish	$80 – $120	The realistic planning figure for a turnkey build with mid-range finishes. Use this one unless you have a reason not to.
High-end or fully custom	$150+	Premium finishes, vaulted and beamed ceilings, high-spec kitchens. A fully custom build can run past $200.

Multiply the standard range by your heated square footage and you have a usable starting budget. The wet wall — kitchen and bathrooms stacked or spread — moves that number more than almost any other design decision, which is why two homes of identical size can differ by tens of thousands.

See full barndominium cost breakdowns by size → — shell, standard and high-end dollar figures for every common footprint from 30×40 to 60×100, plus component costs.

Plan prices are as published by the plan designer and can change without notice — confirm the current price on the plan’s own page before buying. Build-cost figures are national estimates for planning purposes and vary with region, site conditions, material pricing and finish selections. Confirm permit requirements with your county building department before finalizing a design.

Frequently Asked Questions

Ready to choose a plan?

Browse the full catalogue — over 1,200 stock designs, all modifiable. Shop stock plans →

See what’s selling — our best-performing designs. Shop best sellers →

Design your own — custom plans from $1 per square foot. Start a custom design →

Not sure which route is right? Get in touch and we’ll talk it through.